ORIGINAL_ARTICLE
بررسی نقش معماری در کاهش اثرهای محیط زیستی در مجتمعهای مسکونی شهر ایلام با رویکرد معماری پایدار
امروزه اهمیت حفظ محیط زیست و حفظ منابع برای نسلهای آینده در همه زمینهها مورد توجه است. ساختوساز و مجتمعسازی یکی از این زمینههاست که در احداث آنها بایستی اصول معماری پایدار رعایت شود تا اثرهای مخرب محیط زیستی سازهها کاهش یابد. در این راستا، هدف از انجام دادن پژوهش حاضر بررسی نقش معماری در کاهش اثرهای محیط زیستی در مجتمعهای مسکونی شهر ایلام با رویکرد معماری پایدار میباشد که به روش توصیفی- تحلیلی انجام گرفته است. جامعه آماری پژوهش را کارشناسان شهری تشکیل میدهند که تعداد 261 نفر از آنها به عنوان حجم نمونه به روش تصادفی طبقهبندی شده انتخاب شدند. ابزار گردآوری پژوهش پرسشنامه محققساخته است که روایی آن با استفاده از نظر کارشناسان و متخصصان این حوزه تأیید و پایایی آن به روش آلفای کرونباخ به میزان 891/0 تأیید شد. برای تجزیه و تحلیل دادهها در این پژوهش از آمارهای توصیفی و استنباطی (آزمونهای تحلیل عاملی تاییدی و T تک نمونهای) در نرمافزار SPSS استفاده شد. یافتهها حاکی از آن است که اصول معماری پایدار در مجتمعهای مسکونی شهر ایلام اجتماعی- فرهنگی، محیط زیستی و اقتصادی هستند که حدود 62 درصد از عوامل را تبیین میکردند. همچنین، عامل اجتماعی- فرهنگی 66/9 بیشترین سهم و عامل اقتصادی 71/5 کمترین سهم را در تبیین واریانس داشتند. در آخر اینکه وضعیت هر سه اصول در مجتمعهای مسکونی نامناسب و کمتر از حد میانگین است.
https://behs.bhrc.ac.ir/article_114677_77cb11319033ab4a5c968dac115517f2.pdf
2020-09-22
1
8
معماری
معماری پایدار
مجتمع مسکونی
اثرهای محیط زیستی
شهر ایلام
پاکزاد
آزادخانی
pakzad540azad@gmail.com
1
استادیار گروه معماری و برنامهریزی شهری، دانشگاه باختر ایلام
LEAD_AUTHOR
کارن
فتاحی
pakzad540azad@yahoo.com
2
مربی گروه معماری، واحد ایوان غرب، دانشگاه آزاد اسلامی، ایوان، ایران
AUTHOR
احمد
عباسپور
pakzad540azad@hotmail.com
3
گروه معماری دانشگاه باختر ایلام، ایران
AUTHOR
[1] A. Jozi, T. Jafari Nasab, An Investigation on Environmental Impacts of Construction of Mehr Housing Project in Mahmoodabad County of Mazandaran, Environmental Studies, Vol. 40, No. 3, pp. 603-619, 2014. (in Persianفارسی )
1
[2] A. Yaran, H. Behroo, Investigating the Impact of Green Space on Satisfaction of Residents of High-Rise Residential Complexes: Case Study of Multiple Residential Complexes in Tehran, Arman Shahr Architecture and Urban Development, No. 17, pp. 151-162, 2016. (in Persianفارسی )
2
[3] M. Ali Naghizadeh, M. Afshari, Hematali Keikha, Sustainable Design Laws as One of the Basic Foundations of Green Architecture, Monthly Journal of Daneshe Ma, No. 22, pp. 64-71, 2013. (in Persianفارسی )
3
[4] Kh. Afzalian, S. Hassanzadeh Rad, Reconstruction and Reuse with a Sustainable and Green Approach in Contemporary Iranian Residential Architecture, 4th Conference on New Technologies of Building Industry, Sustainable Development and Building Technologies, Permanent Secretariat of Modern Technologies of Building Industry, 2017. (in Persianفارسی )
4
[5] J. Birkeland, Design for Sustainability: A Source Book of Integrated Eco-logical Solutions, Earthscan, London, 2002.
5
[6] P. Azadkhani, S. Shahbazi, R. Samavati, Kh. Nourizad, Investigating the Life Quality in Mehr Housing of Government Employees of Kermanshah, Ilam and Khorramabad, Geography and Environmental Studies, Vol. 4, No. 14, 67-82, 2015. (in Persianفارسی )
6
[7] Gh. Latifi, Gh. Feizi, R. Bajalal, A. Soltanzadeh, Investigation and Evaluation of Housing Policies in Deteriorated Textures: Case Study of Abkouh District of Mashhad, Khorasan Bozorg, Vol. 7, No. 23, pp. 27-43, 2016. (in Persianفارسی )
7
[8] J. D. Chiara, Time-Saver Standards for Residential Building Types, Mc.Graw Hill Pub, New York, 1995.
8
[9] A. Einifar, Range of Residential Complexes and Physical Continuity of the City: Case Study of Tehran, Quarterly Journal of Anbouhsazane Maskan, National Land and Housing Organization, No. 15, pp. 28-35, 2005. (in Persianفارسی )
9
[10] F. Habib, Sustainability Approach in Urban Development, Journal of Environmental Science and Technology, Vol. 9, No. 1, 2007. (in Persianفارسی )
10
[11] H. Kasmaei, A. Baratifard, P. Ghaffari, Attitudes and Principles in Sustainable Architecture, National Conference on Civil Engineering, Architecture, Urban Planning and Energy Management, Islamic Azad University of Ardestan Branch, 2011. (in Persianفارسی )
11
[12] V. Baledari, B. Waziri Farahani, S. Toofan, Sustainable Architecture and Ecotourism for Sustainable Development Goals (Case Study: Lake Neur), Proceedings of the First International Conference on Tourism Management and Sustainable Development, Iran, Marvdasht, 2011. (in Persianفارسی )
12
[13] G. Kohen, Indexing in Sustainable Development (1st Ed.). Bazargani Publishing Company, 1997. (in Persianفارسی )
13
[14] B. Muldan, S. Bilharz, Sustainable Development Indicators, Translated by Neshat Haddad Tehrani, et al., Tehran, Environmental Protection Agency Publications, 2002.
14
[15] F. Shafieyan Dariani, M.R. Pourjafar, A.R. Ghobadi, The Concept of Sustainability in Islamic Architecture and Comparison with the Sustainability Concept in Contemporary Architecture, Journal of Islamic Architecture Research, Vol. 2, No. 5, pp. 32-50, 2014. (in Persianفارسی )
15
[16] M. Alshalbi, B. Shattari, A. Nordin, Sh. Rashid, GIS Based Multi-criteria Approaches to Housing Site Suitability Assessment, Congress Munich Germany, 2006; www.sciencedirect.com.
16
[17] M. Henriksson, Environmental Assessment of Residential Building, University of Industrial Ecology, Goteborg, 2010.
17
[18] E. Rashidzadeh, Sh. Shaghaghi Gondavani, Investigating the Role of Architecture and Importance of Attention to Designing Tourist Resorts in Sustainable Tourism (Ecotourism) Development and Environmental Effects’ Reduction, Second Environmental Planning and Management Conference, Tehran, 2012. (in Persianفارسی )
18
[19] H. Kamelnia, S. Jahanpanah, F. Fereydouni, Analysis and Evaluation of Sustainable Architecture and Urban Design Indicators (Case Study: Masdar Institute of Science and Technology), Proceedings of the First International Congress on New Horizons in Architecture and Urban Development, Tehran, 2014. (in Persianفارسی )
19
[20] M. Maghsoudi, M. Kordjamshidi, Improving Thermal Comfort in the Open Spaces of Residential Complexes, 4th International Conference on New Approaches to Energy Conservation, Tehran, 2014. (in Persianفارسی )
20
[21] A. Bahrampour, A. Modiri, Study of the Relationship between Residents' Satisfaction with Living Environment and Their Sense of Belonging in High-Rise Residential Complex of Tehran Kowsar Township. Journal of Fine Arts, Architecture and Urban Development, Vol. 20, No. 3, pp. 85-94, 2015. (in Persianفارسی )
21
[22] Iran Census Center, Population and Housing Census, Ilam, 2016. (in Persianفارسی )
22
[23] A. Hadinejad, Designing Residential Complexes with Environmental Approach (Case Study Design in Sari City). MSc in Architecture, Shahid Rajaee University of Medical Sciences, Faculty of Architecture and Urban Planning, Supervisor: Dr. Esmaeil Zarghami, 2012. (in Persianفارسی )
23
ORIGINAL_ARTICLE
تأثیر جایگزینی کائولن با سرباره، خاکستر بادی و زئولیت بر مقاومتهای مکانیکی بتن ژئوپلیمری بر پایه کائولن
بتن ژئوپلیمری در سالهای اخیر به عنوان یک جایگزین سبز برای بتن پرتلند مطرح شده است که میتواند از اثرهای منفی زیست محیطی تولید سیمان پرتلند بکاهد. ژئوپلیمرها از دو بخش اصلی منبع آلومیناسیلیکاتی و محلول فعالکننده قلیایی ساخته میشوند. رایجترین منابع آلومیناسیلیکاتی متاکائولن، خاکستر بادی، سرباره کوره آهنگدازی، زئولیت، کائولن است. همچنین، بتن ژئوپلیمری میتواند با استفاده از ترکیب این منابع نیز ساخته شود. اما از سوی دیگر، مطالعه تأثیر استفاده از ترکیب این منابع بر مشخصههای مختلف بتن ژئوپلیمری مانند مقاومتهای مکانیکی و غیره، ضروری به نظر میرسد. در این پژوهش آزمایشگاهی، تأثیر جایگزینی خاکستر بادی کلاس F، سرباره و زئولیت به جای کائولن، بر مقاومتهای فشاری، کششی و خمشی بتن ژئوپلیمری بر پایه کائولن، مورد مطالعه قرار گرفت. در همین راستا، این منابع در نسبتهای 10، 20 و 30 درصد جایگزین کائولن شدند. در ادامه، نمونههای بتن ژئوپلیمری ساخته و در دمای 80 درجه سانتیگراد عملآوری شدند. از نمونهها آزمون مقاومت فشاری، کشش غیرمستقیم و خمش سه نقطهای 7 و 28 روزه گرفته شد. نتایج نشان داد جایگزینی خاکستر بادی کلاس F و سرباره سبب افزایش و جایگزینی زئولیت سبب کاهش مقاومتهای فشاری، کششی و خمشی بتن ژئوپلیمری بر پایه کائولن میشود.
https://behs.bhrc.ac.ir/article_114680_02a9bc9f582e8021f6585890ae573cb5.pdf
2020-09-22
9
15
بتن ژئوپلیمری
کائولن
سرباره
خاکستر بادی
زئولیت
علیرضا
اسپرهم
alireza.esparham.aut.ac.ir@gmail.com
1
گروه مهندسی عمران، سازه و ژئوتکنیک، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران
AUTHOR
میر حمید
حسینی
mirhamid.hosseini@gmail.com
2
استادیار، مهندسی عمران، گروه مهندسی عمران، سازه و ژئوتکنیک، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران
AUTHOR
اعظم
موسوی کاشی
az_mossavi@yahoo.com
3
استادیار، مهندسی مواد، گروه مهندسی مواد، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران
AUTHOR
فرشته
امامی
sf_emami@yahoo.com
4
استادیار، مهندسی عمران، گروه مهندسی عمران، سازه و ژئوتکنیک، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران
AUTHOR
امیربهادر
مرادی خو
amirbahador.mk@gmail.com
5
گروه مهندسی عمران، سازه و ژئوتکنیک، واحد علوم و تحقیقات، دانشگاه آزاد اسلامی، تهران، ایران
LEAD_AUTHOR
[1] W. K. Part, M. Ramli, C. B. Cheah, An overview on the influence of various factors on the properties of geopolymer concrete derived from industrial by-products, Construction and Building Materials, Vol. 77, pp. 370–395, 2015.
1
[2] M. O. Yusuf, M. A. Megat Johari, Z. A. Ahmad, M. Maslehuddin, Strength and microstructure of alkali-activated binary blended binder containing palm oil fuel ash and ground blast-furnace slag, Construction and Building Materials, Vol. 52, pp. 504–510, 2014.
2
[3] J. Davidovits, Global warming impact on the cement and aggregates industries, World Resource Review, Vol. 6, No. 2, pp. 263–278, 1994.
3
[4] R. H. Haddad, O. Alshbuol, Production of geopolymer concrete using natural pozzolan: a parametric study, Construction and Building Materials, Vol. 114, pp. 699–707, 2016.
4
[5] A. Hasanbeigi, C. Menke, L. Price, The CO2 abatement cost curve for the Thailand cement industry, Journal of Clean Production, Vol. 18, pp. 1509–1518, 2010.
5
[6] V. M. Malhotra, Reducing CO2 Emissions, ACI Concrete International, Vol. 28, pp. 42-45, 2006.
6
[7] J. Davidovits, Geopolymer cements to minimise carbon-dioxide green house warming, Ceramic Transactions, Vol. 37, pp. 165-182, 1993.
7
[8] A. M. Rashad, A comprehensive overview about the influence of different additives on the properties of alkali-activated slag–a guide for civil engineer, Construction and Building Materials, Vol. 47, pp. 29–55, 2013.
8
[9] R. McCaffrey, Climate change and the cement industry, Global Cement and Lime Magazine (Environmental Special Issue), pp. 15–19, 2002.
9
[10] C. Chen, G. Habert, Y. Bouzidi, A. Jullien, Environmental impact of cement production: detail of the different processes and cement plant variability evaluation, Journal of Clean Production, Vol. 18, pp. 478–485, 2010.
10
[11] B. C. McLellan, R. P. Williams, J. Lay, A. van Riessen, G. D. Corder, Costs and carbon emissions for geopolymer pastes in comparison to ordinary Portland cement, Journal of Clean Production, Vol. 19, No. 9, pp. 1080–1090, 2011.
11
[12] L. N. Assi, E. E. Deaver, P. Ziehl, Effect of source and particle size distribution on the mechanical and microstructural properties of fly Ash-Based geopolymer concrete, Construction and Building Materials, Vol. 167, pp. 372–380, 2018.
12
[13] K. Amnadnua, W. Tangchirapat, C. Jaturapitakkul, Strength, water permeability and heat evolution of high strength concrete made from the mixture of calcium carbide residue and fly ash, Materials and Design, Vol. 51, pp. 894–901, 2013.
13
[14] P. Duxson, J. L. Provis, G. C. Lukey, J. S. J. van Deventer, The role of inorganic polymer technology in the development of ‘green concrete’, Cement and Concrete Research, Vol. 37, No. 12, pp. 1590–1597, 2007.
14
[15] A. B. Moradikhou, A. Esparham, Comparison of compressive, tensile and flrxural strengths and water absorption of geopolymer and conventional concrete, Proceedings of The 2nd Confrence on Civil Engineering, Architecture and Urbanism of the Islamic Countries, Tabriz, Iran, October, 2019. (in Persianفارسی )
15
[16] A. B. Moradikhou, A. Esparham, Experimental study of the comparison of compressive, tensile and flrxural strengths and water absorption of fly ash-based geopolymer concrete and conventional concrete, Proceedings of The 1st International Conference on Civil, Architecture and Urbanity of Iran, University of Tehran, Tehran, Iran, October 31, 2019. (in Persianفارسی )
16
[17] A. Fernández-Jiménez, I. García-Lodeiro, A. Palomo, Durable characteristics of alkali activated fly ashes, Journal of Materials Science , Vol. 42, No. 9, pp. 3055–3065, 2007.
17
[18] T. W. Cheng, J. P. Chiu, Fire-resistant geopolymer produced by granulated blast furnace slag, Minerals Engineering, Vol. 16, No. 3, pp. 205–210, 2003.
18
[19] P. K. Sarker, S. Kelly, Z. Yao, Effect of fire exposure on cracking: spalling and residual strength of fly ash geopolymer concrete, Materials and Design, Vol. 63, pp. 584–592, 2014.
19
[20] H. Y. Zhang, V. Kodur, S. L. Qi, L. Cao, B. Wu, Development of metakaolin–fly ash based geopolymers for fire resistance applications, Construction and Building Materials, Vol. 55, pp. 38–45, 2014.
20
[21] A. Palomo, M. T. Blanco-Varela, M. L. Granizo, F. Puertas, T. Vazquez, M. W. Grutzeck, Chemical stability of cementitious materials based on metakaolin, Cement and Concrete Research, Vol. 27, No. 7, pp. 997–1000, 1999.
21
[22] T. Bakharev, J. G. Sanjayan, Y. B. Cheng, Resistance of alkali-activated slag concrete to acid attack, Cement and Concrete Research, Vol. 33, No. 10, pp. 1607–1611, 2003.
22
[23] M. Zhang, H. Guo, T. El-Korchi, G. Zhang, M. Tao, Experimental feasibility study of geopolymer as the next-generation soil stabilizer, Construction and Building Materials, Vol. 47, pp.1468–1478, 2013.
23
[24] S. E. Wallah, Creep behaviour of fly ash based geopolymer concrete, Civil Engineering Dimension, Vol. 2, No. 7, pp. 73–78, 2010.
24
[25] P. DeSilva, K. Sagoe-Crenstil, V. Sirivivatnanon, Kinetics of geopolymerization: role of Al2O3 and SiO2, Cement and Concrete Research, Vol. 37. No. 4, pp. 512–51, 2007.
25
[26] W. K. Part, M. Ramli, C. B. Cheah, An overview on the influence of various factors on the properties of geopolymer concrete derived from industrial by-products, Construction and Building Materials, Vol. 77, pp. 370–395, 2015.
26
[27] K. Gao, K. L. Lin, C. L. DeYing Wang, B. L. A. Hwang, H. S. Shiu Tuan, T. W. Cheng, Effect of nano-SiO2 on the alkali-activated characteristics of metakaolin-based geopolymers, Construction and Building Materials, Vol. 48, pp. 441–447, 2013.
27
[28] G. Görhan, G. Kürklü, The influence of the NaOH solution on the properties of the fly ash based geopolymer mortar cured at different temperatures, Composites Part B: Engineering, Vol. 58, pp. 371–377, 2014.
28
[29] D. Hardjito, S. E. Wallah, D. M. J. Sumajouw, B. V. Rangan, On the development of fly ash-based geopolymer concrete, ACI Materials Journal, Vol. 101, No. 6, pp. 467–472, 2004.
29
[30] D. M. Roy, Alkali-activated cements opportunities and challenges, Cement and Concrete Research, Vol. 29, No. 2, pp. 249–254, 1999.
30
[31] B. Mithun, M. C. Narasimhan, N. Palankar, A. U. Ravishankar, Flexural fatigue performance of alkali activated slag concrete mixes incorporating copper slag as fine aggregate, Selected Scientific Papers: Journal of Civil Engineering, Vol. 10. No. 1, pp. 7–18, 2015.
31
[32] C. Shi, A. Fernández Jiménez, A. Palomo, New cements for the 21st century: The pursuit of an alternative to Portland cement, Cement and Concrete Research, Vol. 41, pp. 750–763, 2011.
32
[33] N. Palankar, A. R. Shankar, B. Mithun, Air-cured alkali activated binders for concrete pavements, International Journal of Pavement Research and Technology, Vol. 8, No. 4, pp. 289–294, 2015.
33
[34] A. B. Moradikhou, A. Esparham, Gepolymer concrete based on various alominosilicate sources, Proceedings of The 3rd International Conference on Applied Research in Structual Engineering and Construction Management, Sharif University of Technology, Tehran, Iran, June 26-27, 2019. (in Persianفارسی )
34
[35] C. Panagiotopoulou, G. Kakali, S. Tsivilis, T. Perraki, M. Perraki, Synthesis and Characterisation of Slag Based Geopolymers, Materials Science Forum, Vol. 636-637, pp. 155-160, 2010.
35
[36] C. Villa, E. T. Pecina, R. Torres, L. Gómez, Geopolymer synthesis using alkaline activation of natural zeolite, Construction and Building Materials, Vol. 24, No. 11, pp. 2084-2090, 2010.
36
[37] E. A. Ortega, C. Cheeseman, J. Knight, M. Loizidou, Properties of alkali-activated clinoptilolite, Cement and Concrete Research, Vol. 30, No. 10, pp. 1641-1646, 2000.
37
[38] H. Y. Zhang, S. L. Qi, L. Cao, B. Wu, Development of metakaolin–fly ash based geopolymers for fire resistance applications, Construction and Building Materials, Vol. 55, pp. 38–45, 2014.
38
[39] A. Fernández-Jiménez, M. Monzó, M. Vicent, A. Barba, A. Palomo, Alkaline activation of metakaolin–fly ash mixtures: Obtain of Zeoceramics and Zeocements, Microporous and Mesoporous Materials, Vol. 108, No. 1, pp. 41-49, 2008.
39
[40] R. Rajamma, J. A. Labrincha, V. M. Ferreira, Alkali activation of biomass fly ash–metakaolin blends, Fuel, Vol. 98, pp. 265-271, 2012.
40
[41] S. A. Bernal, E. D. Rodríguez, R. Mejía de Gutiérrez, M. Gordillo, J. L. Provis, Mechanical and thermal characterisation of geopolymers based on silicate-activated metakaolin/slag blends, Journal of Materials Science, Vol. 46, No. 16, pp. 5477-5486, 2011.
41
[42] C. K. Yip, G. C. Lukey, G.C. J. S. J. van Deventer, The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation, Cement and Concrete Research, Vol. 35, No. 9, pp. 1688-1697, 2005.
42
[43] S. Andrejkovičová, A. Sudagar, J. Rocha, C. Patinha, W. Hajjaji, E. F. da Silva, The effect of natural zeolite on microstructure, mechanical and heavy metals adsorption properties of metakaolin based geopolymers, Applied Clay Science, Vol. 126, pp. 141-152, 2016.
43
[44] T. W. Cheng, M. L. Lee, M. S. Ko, T. H. Ueng, S. F. Yang, The heavy metal adsorption characteristics on metakaolin-based geopolymer, Applied Clay Science, Vol. 56, pp. 90-96, 2012.
44
[45] ASTM C33 / C33M-18, Standard Specification for Concrete Aggregates, ASTM International, West Conshohocken, PA, 2018.
45
[46] ASTM C127-15, Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate, ASTM International, West Conshohocken, PA, 2015.
46
[47] ASTM C128-15, Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate, ASTM International, West Conshohocken, PA, 2015.
47
[48] ASTM C136 / C136M-14, Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, ASTM International, West Conshohocken, PA, 2014.
48
[49] ASTM D2419-14, Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate, ASTM International, West Conshohocken, PA, 2014.
49
[50] A. B. Moradikhou, M. H. Hosseni, A. Mousavi Kashi, F, Emami, A. Esparham, Experimental study of the effect of 2-element hybrid copolymer fibers and nano-silica particles on compressive, tensile and flexural strengths of metakaolin-based geopolymer concrete, Journal of Concrete Structure and Materials, Vol. 4, No. 2, pp. 62-82, 2019. (in Persianفارسی )
50
[51] British Standards Institution, Testing Concrete: Method for Determination of the Compressive Strength of Concrete Cubes,
51
BS 1881: Part 116, 1983, London.
52
[52] ASTM C496 / C496M-17, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2017.
53
[53] ASTM C293 / C293M-16, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading), ASTM International, West Conshohocken, PA, 2016.
54
[54] J. G. S. van Jaarsveld, J. S. J. van Deventer, G. C. Lukey, The Characterisation of Source Materials in Fly Ash based Geopolymers, Materials Letters, Vol. 57, No. 7, pp. 1272-1280, 2003.
55
[55] A. Fernández-Jiménez, A. Palomo, Characterisation of Fly Ash: Potential Reactivity as Alkaline Cements, Fuel, Vol. 82, No, 18, pp. 2259-2265, 2003.
56
[56] H. Xu, J. S. J. van Deventer, Geopolymerisation of Multiple Minerals, Minerals Engineering, Vol. 15, No. 12, pp. 1131-1139, 2002.
57
ORIGINAL_ARTICLE
دستورالعمل انجمن معماری ژاپن در کاربرد عملی دینامیک سیالات محاسباتی (CFD) در شرایطِ محیطی باد در تراز عابرپیاده پیرامون ساختمانها
پیشرفت چشمگیر رایانهها و نرمافزارهای دینامیک سیالات محاسباتی[1] در سالهای اخیر، امکان پیشبینی و ارزیابی شرایط محیطی باد در تراز عابر پیادهی پیرامون ساختمانها را، در مرحله طراحی فراهم کرده است. لذا وجود دستورالعملهایی که به صورت خلاصه به نکات مهم وکاربردی تکنیک CFD در این حوزه بپردازد، ضروری است. تأکید این مقاله به دستورالعملهای ارایه شده توسط انجمن معماری ژاپن است. از ویژگی این دستورالعمل آن است که با مقایسه بین پیشبینیهای CFD، نتایج تونل باد و اندازهگیریهای میدانی بر روی 7 نمونه موردی، نتایجی را جمعبندی نموده تا به صورتی نسبتا جامع بتوان بسیاری از شرایط محاسباتی مؤثر بر رژیمهای جریان را بررسی نمود.
[1] Computational Fluid Dynamic (CFD)
https://behs.bhrc.ac.ir/article_114674_57b991c58ec674df95d0f79bb406155d.pdf
2020-09-22
17
23
CFD
باد در تراز عابر پیاده
پیشبینی
دستورالعمل
آزمایش تجربی
سیده حمیده
موسوی
hamideh.moosavi17@gmail.com
1
دانشگاه شهید بهشتی
LEAD_AUTHOR
شهرام
دلفانی
delfani@bhrc.ac.ir
2
بخش تاسیسات مکانیکی و الکتریکی-مرکز تحقیقات راه، مسکن و شهرسازی-تهران-ایران
AUTHOR
[1] T. Stathopoulos, B. A. Baskaran, Computer simulation of wind environmental conditions around buildings, Engineering Structures, 18(11), pp. 876-885, 1996.
1
[2] N., T., Numerical study of wind mode of a territory development, Proceedings of the Second East European Conference on Wind Engineering, Prague, Czech Republic, 1998.
2
[3] P. S. Westbury, M. S. D., T. Stathopoulos, CFD application on the evaluation of pedestrian-level winds, Workshop on Impact of Wind and Storm on City Life and Built Environment, Cost Action C14, CSTB, France, 2002.
3
[4] P. J. Richards, M. G. D., D. McMillan, Y. F. Li, Pedestrian level wind speeds in downtown Auckland, Wind Structure, 5, pp. 151–164, 2002.
4
[5] P. J. Roache, G. K., F. White, Editorial policy statement on the control of numerical accuracy, Fluids Engineering, 108, 1986.
5
[6] AIAA, Guide, Guide for the Verification and Validation of Computational Fluid Dynamics Simulations (AIAA G-077-1998(2002)), American Institute of Aeronautics and Astronautics, Inc, 1998.
6
[7] ERCOFTAC, Best practices guidelines for industrial computational fluid dynamics, 2002.
7
[8] J. Franke, H. C. Jensen, A. G. Kru¨s, H. W. M. Schatzmann, P. S. Westbury, S. D. Miles, J. A. Wisse, N. G. Wright, Recommendations on the use of CFD in wind engineering, in Urban Wind Engineering and Building Aerodynamics, Belgium, 2004.
8
[9] J. F. Recommendations of the COST action C14 on the use of CFD in predicting pedestrian wind environment, the Fourth International Symposium on Computational Wind Engineering, Japan, 2006.
9
[10] A. Mochida, T.Y. S. Murakami, R. Yoshie, T. Ishihara, R. Ooka, Comparison of various k–e models and DSM applied to flow around a high-rise building- Report on AIJ cooperative project for CFD prediction of wind environment, Wind Structure, 5, pp. 227–244, 2002.
10
[11] A. Mochida, Y. H.. T. Iwata, Y. Tabata, Optimization of tree canopy model for CFD prediction of wind environment at pedestrian level, in the Fourth International Symposium on Computational Wind Engineering, Japan, 2006.
11
[12] T. Shirasawa, T. T. R. Yoshie, A. Mochida, H. Yoshino, H. Kataoka, T. Nozu, Development of CFD method for predicting wind environment around a high-rise building part 2, the cross comparison of CFD results using various k-models for the flow field around a building model with 4:4:1 shape, Technol. Des., 18, pp. 169–174, 2003.
12
[13]Y. Tominaga, M. A. T. Shirasawa, R. Yoshie, H. Kataoka, K. Harimoto, T. Nozu, Cross comparisons of CFD results of wind environment at pedestrian level around a high-rise building and within a building complex, Asian Architecture Building Engineering, 3, pp. 63–70, 2004.
13
[14] Y. Tominaga, Y. R. A. Mochida, H. Kataoka, K. Harimoto, T. Nozu, Cross comparisons of CFD prediction for wind environment at pedestrian level around buildings, Part 2, Comparison of results for flow field around building complex in actual urban area, in the Sixth Asia-Pacific Conference on Wind Engineering, Korea, 2005.
14
[15] R. Yoshie, M. A. Y. Tominaga, H. Kataoka, K. Harimoto, T. Nozu, T. Shirasawa, Cooperative project for CFD prediction of pedestrian wind environment in Architectural Institute of Japan, Wind Engineering Ind., Aerodyn, 95, pp. 1551–1578, 2005.
15
[16] R. Yoshie, M. A. Y. Tominaga, H. Kataoka, M. Yoshikawa, Cross comparisons of CFD prediction for wind environment at pedestrian level around buildings, Part 2, Comparison of results of flow field around a high-rise building located in surrounding city blocks, in the Sixth Asia-Pacific Conference on Wind Engineering, Korea, 2005.
16
[17]T. Shirasawa, et al., DEVELOPMENT OF CFD METHOD FOR PREDICTING WIND ENVIRONMENT AROUND A HIGH-RISE BUILDING, Part 2, The cross comparison of CFD results using various k-ε models for the flow field around a building model with 4:4:1 shape (Environmental Engineering), AIJ Journal of Technology and Design, 9(18), pp. 169-174, 2003.
17
[18] Japan, A.I.O., Recommendations for loads on buildings, 2004.
18
[19] R. Yoshie,,M. A. Y. Tominaga, CFD prediction of wind environment around a high-rise building located in an urban area, in the Fourth International Symposium on Computational Wind Engineering, Japan, 2006.
19
[20] H. Hiraoka, Modelling of turbulent flows within plant/urban canopies, Journal of Wind Engineering and Industrial Aerodynamics, 46-47, pp. 173-182, 1993.
20
[21] T. Maruyama, Optimization of roughness parameters for staggered arrayed cubic blocks using experimental data, Journal of Wind Engineering and Industrial Aerodynamics, 46-47, pp. 165-171, 1993.
21
[22] N. Hataya, M. A. T. Iwata, Y. Tabata, H. Yoshino, Y. Tominaga, Development of the simulation method for thermal environment and pollutant diffusion in street canyons with subgrid scale obstacles, in the Fourth International Symposium on Computational Wind Engineering, Japan, 2006.
22
[23] C. W. Hirt, Volume-fraction techniques, powerful tools for wind engineering, Journal of Wind Engineering and Industrial Aerodynamics, 46-47, pp. 327-338, 1993.
23
[24] J. H. P. M. Ferziger, Computational Methods for Fluid Dynamics, Springer, 2002.
24
[25] P. J. Richards, R. P. Hoxey, Appropriate boundary conditions for computational wind engineering models using the k-ϵ turbulence model, Journal of Wind Engineering and Industrial Aerodynamics, 46-47, pp. 145-153, 1993.
25
[26]B. S. D. Launder, The numerical computation of turbulent flows, Computer Methods in Applied Mechanics and Engineering, pp. 269–289, 1974.
26
[27] B. Blocken, T. Stathopoulos, J. Carmeliet, CFD simulation of the atmospheric boundary layer, wall function problems, Atmospheric Environment, 41(2), p. 238-252, 2007.
27
[28] Y. M. A. Tominaga, S. Murakami, Large eddy simulation of
28
flow field around a high-rise building, in Conference Preprints of 11th International Conference on Wind Engineering, Texas, U.S.A., pp. 2543–2550, 2003.
29
ORIGINAL_ARTICLE
طبقهبندی واکنش در برابر آتش عایقهای حرارتی فوم الاستومری انعطافپذیر (FEF)
امروزه کاربرد عایقهای حرارتی فوم الاستومری انعطافپذیر (FEF)[1] مثل اتیلن پروپیلن دیانمونومر (EPDM) و لاستیک نیتریلبوتادیان (NBR) در سیستمهای گرمایشی، سرمایشی و مخازن و لولهها معمول است. ارزیابی رفتار اشتعالی این نوع عایقها به دلیل ماهیت پلیمری آنها با توجه به کاربرد گسترده در صنایع لولهکشی حائز اهمیت است. در این مقاله، عملکرد سه نوع رایج از این عایقها در برابر آتش شامل EPDM، NBR و NBR-PVC به وسیله آزمونهای استاندارد واکنش در برابر آتش، ارزیابی شده و بر اساس نتایج حاصل از آزمونها، طبقهبندی خطر آتش بر اساس استاندارد طبقهبندی واکنش در برابر آتش صورت گرفته است. الزامات مقرراتی درباره کاربرد این نوع عایقها بر اساس ارزیابی آزمایشگاهی و مبحث سوم مقررات ملی ساختمان (محافظت ساختمانها در مقابل حریق) ارائه شده است. در حال حاضر در کشور، این روش ارزیابی، به عنوان ابزاری کارآمد در حوزه کنترل کیفی عایقهای FEF از نظر ایمنی در برابر آتش، طی روند صدور گواهینامه فنی در مرکز تحقیقات راه، مسکن و شهرسازی استفاده میشود.
[1]Flexible Elastomeric Foam
https://behs.bhrc.ac.ir/article_114686_2a27bdce14bf7b023ae14bc4cfe9e3c5.pdf
2020-09-22
25
29
عایق حرارتی فوم الاستومری انعطافپذیر (FEF)
واکنش در برابر آتش
طبقهبندی
ایمنی در برابر آتش
لولهها
الزامات
لیلا
تقی اکبری
ltaghiakbari@yahoo.com
1
مرکز تحقیقات راه، مسکن و شهرسازی
LEAD_AUTHOR
سعید
بختیاری
bakhtiyari@bhrc.ac.ir
2
عضو هیئت علمی
AUTHOR
زهرا
درودیانی
dorodi22@yahoo.com
3
کارشناس تحقیقات آتش
AUTHOR
[1] David F. Lawson, Recent Developments in the Flammability of Elastomeric Materials, Rubber Chemistry and Technology, Vol. 59, No. 3, pp. 455-481, 1986.
1
[2] P. J. Z. Fandi , SPECIAL PURPOSE RUBBER PRODUCTS, en.cnki.com.cn, 1999.
2
[3] J. Q. Wang, W. K. Chow, A Brief Review on Fire Retardants for Polymeric Foams, Journal of applied polymer science, Wiley Online Library, 2005.
3
[4] S. K. Srivastava, T. Kuila, Fire Retardancy of Elastomers and Elastomer Nanocomposites, Polymer Green Flame Retardants, Chapter 18, pp. 597-651, 2014.
4
[5] Third Part National Building Regulation, Building and Housing Research Center, 2016. (in Persian)
5
ORIGINAL_ARTICLE
مطالعه رفتار دال تخت مجوف دوطرفه کوبیاکس با گوی لهیده تحت بار ثقلی با استفاده از آزمایشهای تمام مقیاس و مدلسازی عددی
یکی از سقفهای متداول برای پوشش دهانههای بزرگ، سقفهای سازهای جدید مانند دال تخت مشبک و دال مجوف است. دال کوبیاکس، از میان آنها، با کاهش حدود 30 درصدی مصرف بتن و بار مرده از جمله سیستمهای مطلوب و اقتصادی دال تخت به شمار میرود. مقاله حاضر به بررسی رفتار سازهای دال تخت کوبیاکس باگوی لهیده به صورت آزمایشگاهی و عددی میپردازد. برای بررسی رفتار این سیستم در مقیاس واقعی، نمونهای از یک سازه واقعی یک طبقه بتن آرمه به ابعاد 32 متر در 32 متر متشکل از سه دهانه دال تخت کوبیاکس (دو دهانه کناری 10متری و یک دهانه میانی 12 متری در هر دو جهت) در مرکز تحقیقات راه، مسکن و شهرسازی ساخته و تحت آزمایش بارگذاری و باربرداری ثقلی با سیال آب و با در نظر گرفتن ترتیبهای مختلف بار زنده در دهانههای مختلف سقف قرار گرفته است. در این آزمایش، مقادیر بار ثقلی و پاسخهای واقعی تغییر شکل سازه اندازهگیری، منحنی بار- تغییر مکان به همراه ارزیابی تغییرشکلهای ماندگار، ترکخوردگی و نحوه توزیع ترکها در مقادیر بار بالاتر از تراز بهرهبرداری و رفتار بلند مدت این سیستم تحت بار ثقلی مورد ارزیابی قرار گرفت. همچنین، ضرایب ترکخوردگی معادل رفتار غیرخطی بتن با استفاده از مدلسازی خطی به روش اجزاء محدود به دست آمد. نتایج مهم حاصل از مطالعه حاضر رفتار مناسب این سیستم را تحت بارهای ثقلی کوتاه مدت نشان داد. ولی برای بررسی رفتار آن در برابر بارهای بلند مدت نیاز به مطالعات بیشتری است.
https://behs.bhrc.ac.ir/article_114679_63eb37a83c492d79ce66b2a63cdceb28.pdf
2020-09-22
31
42
دال مجوف
کوبیاکس
آزمایش تمام مقیاس
آزمایش بارگذاری
سختی خمشی
تابآوری
خیز بلند مدت
فرهنگ
فرحبد
f.farahbod@bhrc.ac.ir
1
عضو هیأت علمی و رییس بخش مهندسی سازه مرکز تحقیقات راه، مسکن و شهرسازی
LEAD_AUTHOR
مهدی
مواسات
mahdi_movasat@yahoo.com
2
AUTHOR
[1] L. Chung, S. H. Lee, S. H. Cho, S. S. Woo, K. K. Choi, Investigations on Flexural Strength and Stiffness of Hollow Slabs, Adv. Struct. Eng., Vol. 13, No. 4, pp. 591–601, Aug. 2010.
1
[2] Building Code Requirements for Reinforced Concrete (ACI 318-63), ACI Committee 318, Google Books, [Online].
2
[3] Building Code Requirements for Reinforced Concrete (ACI 318-71), [Online].
3
[4] ACI Committee 437, Load tests of concrete structures: methods, magnitude, protocols, and acceptance criteria (ACI 437.1R-07), 2007.
4
[5] T. Tina, C. Lai, Structural behavior of BubbleDeck® slabs and their application to lightweight bridge decks, 2010.
5
[6] M. Abramski, Bearing behaviour of biaxial hollow core slabs Test scheme for the evaluation of the shear capacity, pp. 1–8, 1971.
6
[7] A. Ibrahim, N. Ali, W. S. D. J. of E. sciences, and undefined 2013, Flexural capacities of reinforced concrete two-way bubbledeck slabs of plastic spherical voids, iasj.net.
7
[8] M. Bindea, R. Zagon, Z. K. A. T. N. Civil, and undefined 2013, Flat slabs with spherical voids, Part II, Experimental tests concerning shear strength, constructii.utcluj.ro.
8
[9] A. C. I. (ACI), Building Code Requirements for Structural Concrete (ACI 318-14), 2014.
9
ORIGINAL_ARTICLE
بررسی ضریب هدایت حرارتی و مقاومت فشاری عایقهای حرارتی شیشه سلولی
در راستای صرفهجویی در مصرف انرژی در ساختمان و تأسیسات و رویکرد توسعه پایدار، عایقکاری حرارتی از اهمیت ویژهای برخوردار است. شیشه سلولی یا فوم شیشه یکی از انواع مصالح عایقکاری حرارتی نوین در ایران است که دارای خواص فیزیکی و حرارتی مناسب برای کاربردهای خاص است. با توجه به آغاز تولید شیشه سلولی در کشور لازم است خواص فیزیکی و حرارتی این عایقهای حرارتی بررسی شود. این فراورده صلب است و از شیشه منبسط با یک ساختار سلول بسته ساخته میشود. قسمت عمده آن از شیشه ساخته شده است و جزء عایقهای معدنی محسوب میشود. مزایای آن شامل سبکی، مقاومت مکانیکی زیاد و خواص مناسب عایقکاری حرارتی و صوتی آن است. این ماده مقاوم در برابر رطوبت، آتش و خوردگی است و در بهرهبرداری درازمدت، دارای عملکرد خوب در محیطهای نامناسب و مهاجم است. این مصالح در عایقکاری حرارتی ساختمان، تأسیسات ساختمانی، صنایع نفت، صنایع شیمیایی و سایر مصارف استفاده میشوند. با استفاده از نتایج آزمونهای انجام شده در پژوهشی با این عنوان بر روی نمونههای شیشه سلولی، رابطه ریاضی بین ضریب هدایت حرارتی با چگالی و همچنین بین مقاومت فشاری و چگالی ظاهری این فراوردهها تعیین و نمودارهای مربوط ترسیم شد. بررسیها نشان داد ضریب هدایت حرارتی، مقاومت فشاری با افزایش چگالی ظاهری به طور خطی افزایش مییابد. با استفاده از روش آزمون غیرمستقیم، با اندازهگیری چگالی ظاهری نمونههای شیشه سلولی و در دست داشتن نمودار رابطه بین ضریب هدایت حرارتی و چگالی ظاهری از یک سو و مقاومت فشاری و چگالی ظاهری از سوی دیگر میتوان مقادیر ضریب هدایت حرارتی و مقاومت فشاری را با دقت قابل قبولی تخمین زد.
https://behs.bhrc.ac.ir/article_115124_317dbf3d8212ad1439e342edd5792fbc.pdf
2020-09-22
43
49
شیشه سلولی
عایق حرارتی
ضریب هدایت حرارتی
چگالی
مقاومت فشاری
سهراب
ویسه
veiseh@bhrc.ac.ir
1
مدیر بخش مصالح و فراوردههای ساختمان و عضو هیات علمی مرکز تحقیقات راه، مسکن و شهرسازی
LEAD_AUTHOR
مهناز
مظلومی ثانی
mazloomisani_m@bhrc.ac.ir
2
کارشناس پژوهشی
AUTHOR
[1] Cellular Glass Insulation Guide, FOAMGLAS for the Building Envelope, www.foamglas.com.
1
[2] Product Profile, The Thermal Insulation System, www.foamglas.co.uk.
2
[3] Thermal insulation systems for the entire building envelope, www.foamglas.com.
3
[4] Foamglas insulation-general brochure, Pittsburgh Corning March 2014, www.foamglas.com.
4
[5] Foamglas insulation systems for Industrial Applications with Operating Temperatures of -268°C to +482°C, www.foamglas.com.
5
[6] Award Guideline 0406, Cellular Glass Insulation Boards, Version, June 2015.
6
[7] Thermal Conductivity of Wet Insulations, Ludwig Adams, ASHRAE JOURNAL, October 1974.
7
[8] Ecological assessment of construction products, www.foamglas.com.
8
[9] ASTM C552 – 17, Standard Specification for Cellular Glass Thermal Insulation.
9
[10] استاندارد ملی ایران به شماره 10951، فراوردههای عایقکاری حرارتی برای ساختمان- فراوردههای کارخانهای- شیشه سلولی- ویژگیها.
10
[11] BS EN 13167, 2012+A1, 2015, Thermal insulation products for buildings -Factory made cellular glass (CG) products- Specification.
11
[12] استاندارد ملی ایران به شماره 16838، فراوردههای عایقکاری حرارتی برای تأسیسات ساختمانی و تجهیزات صنعتی- فراوردههای کارخانهای شیشه سلولی- ویژگیها.
12
[13] BS EN 14305, 2015, Thermal insulation products for building equipment and industrial installation-Factory made cellular glass (CG) products- Specification.
13
[14] استاندارد ملی ایران شماره 8621، سال 1385، مصالح ساختمانی- فراوردههای عایقکاری حرارتی- تعیین مقاومت حرارتی و ضریب هدایت حرارتی به وسیله لوح گرم محافظتشده و روش جریان حرارتسنج فراوردههای با مقاومت حرارتی زیاد و متوسط- روش آزمون.
14
[15] EN 12667, Thermal performance of building materials and products, Determination of thermal resistance by means of guarded hot plate and heat flow meter methods, Products of high and medium thermal resistance.
15
[16] استاندارد ملی ایران شماره 7114، سال 1396، فراوردههای عایقکاری حرارتی برای ساختمان- تعیین ضخامت- روش آزمون.
16
[17] EN 823, Thermal insulating products for building applications- Determination of thickness.
17
[18] استاندارد ملی ایران شماره 7298، سال 1396، فراوردههای عایقکاری حرارتی برای ساختمان- تعیین ابعاد خطی آزمونهها– روش آزمون.
18
[19] EN 12085, Thermal insulating products for building applications - Determination of linear dimensions of test specimens.
19
[20] استاندارد ملی ایران شماره 7118، سال 1396، فراوردههای عایقکاری حرارتی برای ساختمان- تعیین چگالی ظاهری– روش آزمون.
20
[21] EN 1602, Thermal insulating products for building applications- Determination of apparent density.
21
[22] استاندارد ملی ایران شماره 7117، سال 1396، فراوردههای عایقکاری حرارتی برای ساختمان- تعیین رفتار فشاری– روش آزمون.
22
[23] EN 826, Thermal insulating products for building applications- Determination of compression behavior.
23