@article { author = {veiseh, sohrab and Amirian, Mahsa}, title = {An Investigation on Some Properties of High Pressure Laminate (HPL)}, journal = {Building Engineering & Housing Science}, volume = {13}, number = {4}, pages = {41-47}, year = {2020}, publisher = {}, issn = {1735-8736}, eissn = {}, doi = {}, abstract = {High pressure laminate or HPL consists of kraft paper and phenolic resin placed in high pressure and high temperature and eventually covered with decorative paper and melamine resin layer. HPL is widely used in many applications such as building facades, interior wall coverings and ceilings. Its low density makes the building lighter and safer against earthquake forces (due to low dead load). This is the main advantage of HPL over other facing materials. Due to its elasticity, HPL performs well against various pressures such as wind. In this research, the test results of some physical properties including density, moisture resistance, water absorption, impact resistance and flexural strength on two types of HPLs available in the market are presented and studied. Test results showed that both specimens were highly resistant to impact and no defects were observed after the experiments. The experiments showed relatively high flexural strength and moisture resistance of these sheets.}, keywords = {High Pressure Laminate,HPL,Flexural Strength,Impact resistance}, title_fa = {بررسی برخی خواص لمینیت‌های فشار زیاد (HPL)}, abstract_fa = {ورق‌های لمینیت فشار زیاد (HPL[1])، متشکل از لایه‌های کاغذ کرافت و رزین فنلی است که در فشار و حرارت زیاد قرار می‌‌گیرند و در نهایت، توسط کاغذ تزیینی و لایه رزین ملامین پوشانده می‌شوند. صفحات HPL کاربرد وسیعی در زمینه‌های گوناگون از جمله نمای ساختمان، پوشش دیوارهای داخلی و سقف دارد. چگالی کم آن موجب سبک‌سازی و ایمنی بیشتر ساختمان در برابر زلزله (به علت بار مرده کم) می‌گردد که اصلی‌ترین مزیت HPL نسبت به سایر نماهای ساختمانی است. این ورق‌ها به دلیل داشتن خاصیت ارتجاعی، در مقابل فشارهای گوناگون مانند فشار باد عملکرد خوبی نشان می‌دهند. در این پژوهش نتایج به دست آمده از آزمون برخی خواص فیزیکی، شامل: چگالی، مقاومت در برابر رطوبت وجذب آب، مقاومت در برابر ضربه و مقاومت خمشی بر روی دو نوع فرآورده HPL موجود در بازار ارایه شده و مورد بررسی قرار گرفته است. نتیجه آزمو‌ن‌ها نشان داد که هر دو نمونه‌ در برابر ضربه مقاومت بالایی دارند و هیچگونه آثار خرابی در آنها پس از آزمون دیده نشد. نتایج آزمون‌ها نشانگر مقاومت خمشی نسبتا زیاد و مقاومت این ورق‌ها در برابر رطوبت است.   [1] High Pressure Laminate}, keywords_fa = {لمینیت فشار زیاد,HPL,مقاومت خمشی,مقاومت در برابر ضربه}, url = {https://behs.bhrc.ac.ir/article_134955.html}, eprint = {https://behs.bhrc.ac.ir/article_134955_6534bb030ffe81756bbf70bae95c6f10.pdf} }